Home > Pool Cleaners > Hayward > Hayward Inground Pool Cleaners >

Twister Power Steering For Your Pool Cleaner
Twister Power Steering For Your Pool Cleaner


 
Our Price: $65.00
Sale Price: $49.00
Savings: $16.00

Quantity in Stock:1

Product Code: TWI-100
Qty:

Description
 
Twister is designed do be used only with suction side style cleaners. Twister will not fix a pool cleaner's performance if the pool cleaner has defective or worn components, or if the hoses are kinked, cracked or otherwise need replacing. Also ensure that the pool cleaner and/or flow control device have been installed correctly. Twister is not a fully sealed unit and will suck in air if it floats above the pool water level. In addition to following the pool cleaner manufacturer's recommendations, it may be necessary to add an additional hose weight in front of Twister to keep it submerged. If you have a Hayward Navigator or Pool Vac Ultra, install Twister according to the above instructions. However, do not install the 30° Angled Adapter that is supplied with Twister. This part will not be necessary for these self-steering types of pool cleaners. If you have a Baracuda X7 Quattro, install Twister according to the above instructions. Fit the 30° Angled Adapter firmly over the two lugs on the Flex-Connector (P/N X77039). Cut the Twist-Lock end from the hose and insert small end of the 30° Angled Adapter into the hose. If the cleaner still sticks in sharp corners of your pool remove the Flex-Connector and fit the 30° Angled Adapter directly to the Outer Extension Pipe (P/N X77027).

Twister Power Steering For Your Pool Cleaner

Share your knowledge of this product. Be the first to write a review »